Brass Chain and Sprocket kit for PULSAR 220CCDTSi/2017 – KIT HPORC 354

₹2,724.00

10 in stock

Specification

Front Sprocket:

S 02 249SR – 14 Teeth
Mounting:- 2 Tap on PCD + Involute Spline with Bonding

Rear Sprocket:

S 02 431 – 36 Teeth
Mounting:- 4 equispaced Holes on PCD + Bore

Chain:

R520HPORC-104-1

Reliable with high performance & longer life.
Smooth operation & higher transmission accuracy.
Anti-resistant coating with Superior quality.
Anti-wear performance which lets vehicle move with full power.
Produced with Hi-Tech accurate machining which reduces noise and provides smoother riding.
The fitment of the product is as per OE specification.
Heat treated and hand finished to perfection.
Every sprocket goes through 18 production stages and 15 individual quality control checks before it is ready to leave the manufacturing facility.

Sprockets are manufactured from carbon steel material with duly induction hardened teeth.
Sprockets are only made using the best available materials.
Zinc coating to provide better rust prevention.
Induction hardening to improve wear resistance with outstanding performance.
Shot blasted sprockets with improved surface fatigue strength.
Sprockets are made of best surface protection treatment which enables to withstand dust and muddy ride with ease.
Sprockets are of made with best position accuracy to ensure better fitment capabilities.
Good surface finish that makes ride smoother.

Pack Contains:

Pack Contents one Rear Sprocket,Front Sprocket,Chain

Chain Maintenance:

Lubricate the Chain using ROLON Chain Lube for every 500km in Seal ring chains and every 1000km for Standard Chains.
Clean the Chain using ROLON Chain Clean Spray. Every 2500 -3000 km’s once chain should be cleaned and then re lubricated.
Use nylon brush or soft cloth before lubricating the Chain.
Avoid usage of Steel wire brushes to Clean Chain.
Don’t use petrol,thinner and hot water for cleaning,and high pressure water jet direct contact to seal ring chain should be avoided.
Make sure your chain should be in adequate chain slackness – 1 inch min.
Dampers should be changed while chain sprocket replacement for better life of Chain Kit.
Wear Helmet for Safety – Follow Traffic Rules.